Compact stud gun welds both aluminum and steel pulling studs to  panels for quick & easy dent pulling repair. Patented microprocessor  control assures maximum pull strength with minimal heat distortion.  Package includes 9700 gun with 15’ cable to 115VAC power supply, aluminum & steel studs and pull tabs, tips and weld-tip puller is ABS gun storage case.

The Dual-Spotter DELUXE is the one and only hand-held stud gun capable of setting both steel and aluminum pulling studs. It’s unique patented micropressor design provides accurate current control to assure maximum pulling strength with minimal heat distortion. There is no burn-thru on the interior side of the panel to remove protective coatings and the studs (or tabs) are easily removed from the panel with much less surface damage than is common with conventional stud welders. The touch-tip ground legs provide positive contact on all surfaces and are clearly identifiable, to prevent cross contamination, for steel or aluminum panels.

Professional Dual pulling system for aluminum and steel panels with premium output power and digital control for ease of use and quick repairs. Select ALUMINUM or STEEL mode and set operator adjustments. System comes with Aluminum CD-gun and steel torch, 4mm & 6mm AL collets & studs, 4 spot tips for studs, wire, tabs or shrink rod and connects directly to slide-hammer for “Touch & Pull” operation with exclusive weld-tips. Package includes power supply with extended torches & ground cables, 2 AL-tips and 5 steel-tips, powered slide hammer with T-handle and hook, studs, tabs, wire and rods.

Package includes UNI-9812 Machine Cart

UNI-9802/UNI-9862 Dual-Spotter Aluminum and Steel Dent Repair System

• Maximize Your Investment: Why tie up your

investment with two separate systems? Patented Dual-Spotter technology allows for both steel and aluminum repair jobs.

• Versatile Solution: 115V power supply allows

system to be used anywhere in the shop. Bring the system to your repair!

• Digital Controls: Custom power settings allows user to set panel thickness and stud diameters on both steel and aluminum dent pulling applications.

• Complete Solution: UNI-9862 includes power

supply and cart stocked with all the accessories needed for any type of collision repair job.

• Easy To Use System: Quickly change dedicated torches and grounds to work with both aluminum and steel studs, steel tabs, wiggle wire, and

exclusive weld-tip slide hammer. No chance for cross-contamination of metals!