Solidus Allsweld Pulse Mig is a single-phase, 200 Amp, multi-function inverter generator for Mig Pulse, Mig Double Pulse, MIG-MAG, Stick and TIG Welding (with “Lift” type ignition)

Versatile 3 torch system; can be set up with steel, silicone bronze, aluminum, or any combination

Lightweight and portable with 2 gas tank positions

Easy weld setup and programming with single button selectable options

Single or double-pulse operation

Double roller drives for accurate and consistent wire feed

TIG and stick welding capability

The Allsweld ADP-200-1 is a COMPACT, SINGLE PHASE, SYNERGIC, MULTI-PROCESS INVERTER GENERATOR

for MIG / MAG, MMA, TIG “Lift”, PULSE and DOUBLE PULSE WELDING, characterized by cutting edge, attractive design with next generation inverter technology. 

ADP-200-1, offers great flexibility and portability, with high-quality welding characteristics on all materials,

such as stainless steel, aluminum and zinc coated steel, by minimizing work due to spatters. The innovative,

practical design equipped with the extraordinary VISION-ARC software to satisfy those who wish to combine

synergy with complete control of all welding parameters. The spatter-free welding feature will minimize the work load and ensure excellent performance in TIG and Stick welding processes.

This versatile 1 torch system can be set up with steel, silicone bronze or aluminum.

• Innovative, technologically advanced, and easy to use

• Steel structure with shockproof plastic front frame.

• Controls protected by a visor.

• Synergic digital control of all welding parameters.

• High electrical performance resulting in a reduction

 in energy consumption.

• Professional large diameter 4-roller wire feeder that

 guarantees precise and constant feeding of the wire

The MIG / MAG pulsed welder with 3 integrated wire feeders is ideal for car body repairers. Equipped with a digital PFC (Power Factor Correction) the Autopulse supplies double pulsed welding quality comparable to three-phase products. 

Designed for highest performance, the Autopulse 220-M3 features multiple synergic settings which enables exceptional arc quality.

The 220-M3 is a very advanced Pulsed Mig/Mag Welder. It has 3 welding torches for use with multiple materials including Steel, Aluminium, and Brazing (CuSi3 / CuAl8) 

 Optimized MIG Pulse Welding Settings 

• Welding processes: Standard, Pulse, Pulse in Pulse, Cold Pulse, and Manual.

• Trigger modes: 2T - 4T - Spot, Delay, and Tack functions.

• Accurate Digital Control over the welding cycle: Creep Speed, Soft start, Hot start, Up slope,

• Down slope, Crater Fill, Post gas, etc.

• 2 specific compartments isolate and prevent cross-contamination of the Aluminum wire.

• Steel wire Ø 0.6 / 0.8 / 1.0 mm (upper compartment n ° 1)

• Aluminum wire Ø 0.8 / 1.0 / 1.2 (Isolated in lower compartment n ° 2)

• CuSi and CuAl wire Ø 0.8 / 1.0 mm (upper compartment n ° 1)

 MAXIMUM PRODUCTIVITY & Performance - The Leader In Mig Pulsed Welders

• 4 microprocessors to give four times the processing power.

• 3-wheel drive system with 2 active drive rolls.

• Up to 3 wire reels of Ø 200 mm accepted.

• Automatic torch detection while pulling the trigger.

• Balancing arm with torch support (x3) and welding helmet holder

• Push pull torch compatibility (24V)

• Spool Gun compatibility (ideal for soft wire(AlSi5 / AlSi12).

SIMPLIFIED WELDING Through Ultrafast Intelligent Microprocessor Software

• 57 (Adjustable) synergic curves ensure outstanding welds for a large range of

     materials, wire sizes, material thickness, and gas.

• The fully synergic mode calculates the optimal welding parameters automatically, this can also be adjusted manually, ideal for car-body applications with very thin sheet materials.

The HSM250 Double-Pulse Synergic Multi-purpose MIG/TIG/STICK welder is the choice of automotive repair professionals with unparalleled performance. This compact machine offers three MIG wire feed and torch drives with 28 synergic, synergic single-pulse or synergic double-pulse programs for steel, aluminum and silicone bronze welding with wire sizes from .023”-.045”. The unit also features lift-arc DC TIG and electrode welding capability. With 250 amps of power, it is capable of welding all steel and aluminum alloys from #20GA to ½”. Additionally, it offers twin cylinder racks and dual gas inputs for mixed and 100% gases.

System features IGBT high efficiency inverter power supply with epoxy sealed components in a full size shop cabinet with the highest duty-cycle rating in class. Operating features include digital control panel with 28 pre-loaded synergic pulse programs, infinitely variable output power from 10-250 amps and operator selectable pre & post gas, slow feed, burn back, spot, ramp, slope, frequency, duty, arc length, spool gun, hot start, and arc force.

Package includes double pulse synergic inverter power supply with three dedicated MIG guns, compact TIG torch with thumb-wheel control and quick-connect welding cable 12.5’, 250A work clamp with quick-connect welding cable 10’, 250-amp electrode holder with quick-connect welding cable 10’, dual gas regulators, AK-2 torch kit, spool of steel, aluminum and silicone bronze wire, “V” & “U” drive rolls and operator manual.

Professional multimig synergic inverter welder provides 200 amps of power for MIG, TIG and Stick applications on either a 115 or 230 volt line. Welder features voltage, wire speed, amperage and full Synergic scroll-down settings for steel, aluminum and silicone bronze, on LCD display. Spool gun selection switch, euro-connect flange for torch & spool gun and lift-arc start foot pedal connector are standard. Standard package includes synergic inverter power supply, HSL15 torch 10’, 200A earth clamp 10’, HSM17 TIG torch 12.5’, 200A electrode holder 10’, foot pedal control 12.5’, gas regulator with hose, steel welding wire, AK-2 kit and operator manual. Optional aluminum spool gun is available.