The Dent Fix DF-EZA1 Airless Plastic Welder is an economical way to do limited plastic welding. Airless plastic welding has been around since the late 1970’s and still can be used today. Capable of repairing most basic tears, gouges, cracks, and some tabs, airless plastic welding will accomplish virtually all repairs that can be performed using adhesives. Kit includes 2 tips (1 spade spreading tip, 1 feeder welding tip). 5 types of 3mm plastic rod in, ABS, Polypropylene, Polyethylene, Polycarbonate, and Polyurethane. Small compact sizes

APPLICATION

Compact airless plastic welder for repairing the most basic tears, gouges, cracks, and some tabs on damaged automotive parts.

FEATURE & BENEFITS

• EASY OPERATION - Turn the dial to the correct heat setting and you are plastic welding!

• TWO TIPS - The Spade Tip and Feeder Welding Tip gives you two tools in one.

• COMPACT - Easily bring this to any job around the shop and store in a drawer when done.

• 1 YEAR WARRANTY - Peace of mind your tool will last for a long time.

CAPABILITIES

Airless welding offers a wide variety of plastic repair options for a minimal amount of investment. 5 different types of plastic rods are included in the kit and allow for repairing the following types of plastics: ABS, Polypropylene, Polyethylene, Polycarbonate, and Polyurethane. Easily select the correct temperature setting with the adjustment knob which raises or lowers the temperature of the tips to meet the heat requirements to correspond with the appropriate type of plastic. A plastic Feeder Welding Tip provides a great method to melt plastic material into the V-Grove of the repair. The Spade Spreading Tip can be used to smoothed out finish the repair.

The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST. A high pressure N2 Outlet gives you the ability to attach air-powered tools to the side of the unit. This creates a pneumatic source that is highly mobile and can be used all over the shop (must be with reach of an electric outlet to power the onboard generators).

Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)

The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.

he cart is equipped with a heat gun holster, and a power strip for powering other tools such as the optional digital set heat gun (DF-900HG) and thermal hot stapler (DF-800BR) that use StapleClips.

The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts.

The EZ Nitro Plastic Repair Station - Extended: Engineered to meet the needs of Premier Auto Body Shops everywhere. Utilizing our Award Winning Nitrogen Plastic Welder with a Dual Chamber Nitrogen Generator, the DF-EZN1G/DXE converts shop air into nitrogen and there is no need to refill nitrogen bottles! The easiest to use and most capable plastic welder station EVER, available only from Dent Fix!

Ditch the bottle! There is no need to refill nitrogen bottles thanks to our on-board nitrogen generator!

The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G/DXE the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.

In addition to a nitrogen welder the kit also includes a thermoplastic hot stapler kit, complete with 7 variety of staples. We also include three mini die grinders with 3 different bits, hand seamer, heat gun, ring hammer, multi-clip pliers, shaping tools, trim removal tools, and a complete variety of every plastic welding rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane).

As added bonus, a high pressure N2 Outlet gives you the ability to attach air-powered tools to the side of the unit and run on nitrogen! Nitrogen is beneficial because it has a lower moisture content, compared to shop air, which helps safeguard the internals from corrosion.

SAVE MONEY IN THE LONG RUN Over the coarse of a year how many times does your shop refill the nitrogen tanks? It can get expensive. Ditch the bottle and make the switch to EZ Nitro Generator, Today!

NO MORE DELAYS & NEVER REFILL TANKS - Have you ever run out of N2 in the middle of a job? If you have, it is annoying and requires a run to the welder supply store. Eliminate delays and never run out again.

AVOID N2 TANK SAFETY CONCERNS - Nitrogen tanks are under high pressure and have the potential to be a workplace hazard. Plus extra tanks can take up precious shop floor and have to be stored properly.

The DF-EZN1G/DXE EZ Nitro Plastic Repair Station from Dent Fix Equipment is everything you need your plastic repair station to be, plus more.

Kit Includes:

EZ Nitro Plastic Welder with Nitrogen and Airless Plastic Welding capabilities

Nitrogen Generator - Creates nitrogen from the atmosphere eliminating the need to refill bottles!

Hot Stapler - Deluxe Kit with 7 varieties of StapleClips (DF-800BR)

Assortment of Plastic Welding Rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane)

Three (3) Mini Die grinders with 3 Unique Bits

Electronic-Controlled Heat Gun (DF-900HG)

Double End Nylon Dolley (DF-900DEND)

Round Head Nylon Chisel (DF-900RHND)

Aluminum Tape (DF-EZN1-AT150)

Multi-Clip Pliers (DF-625)

Clip Lifter (DF-618CL)

Hand Seamer (DF-EZN1HS)

Ring Hammer (DF-903)

Dust Cover

Utility Wedge Set (DF-609)

Plastic Lever Scraper (DF-WK20)

Heat Gun Holster

Lockable Cabinet with Keys

Exclusive #1

A built-in compressor allows you to free yourself from bulky hoses and noisy shop bleed air while making the system completely PORTABLE and used anywhere!  The Nitro-Weld is also the most cost-efficient machine as the heated air runs during setup allowing for “on-demand” nitrogen use.

Exclusive #2

The nitrogen hot iron/staple torch offers contaminate-free nitrogen shielded repairs when reflowing or stapling.

This means no contamination or toxic smoke while stapling or reflowing plastic panels.

System features digital control with two torches for both air welding and hot staple/reflow functions. Unit runs on 115 volt power and features easy to use interface panel, alarm indicator for low/no gas pressure, adjustable welding temperature setting, power settings for both hot staple & hot melt/reflow, visual indicator nitrogen alert, and hot air mode for gas conservation.

Package includes nitrogen welder with both welding + hot staple/reflow torches, professional cart w/cylinder support, starter plastic and staple consumable kit, hand seamer, hot melt blades, aluminum tape, dual gauge regulator w/hose, 80CF nitrogen cylinder, and operator manual.