The Original Spitznagel DF-15DX Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valved cylinder applies gentle pressure toward the panel. When the drill bit starts to turn even more pressure is applied. This Smart pressure valve helps prevent breakage of bits and applies correct consistent pressure from the first to the last spot weld, ensuring the long life of your bits by preventing breakage. The 1000-rpm motor makes sure you do not burn up bits prematurely and is perfect for Higher Strength (HSS) and Boron Steels (UHSS). The DF-1690 specialized Tungsten Carbide drill bit is needed to drill through Boron steels. The ultimate spot weld drill lets you set the depth. Using the large blue adjustment ring you may set your drilling depth. Drill through only the top panel and leave the underlying panel clean and ready for the replacement. No plugs to grind off and no pilot drill holes to fill. The DF-15DX is our 1000-rpm depth adjustable drill with large 3 inch tall C-clamp (DF-SPD48L). It will arrive with one 8.0 mm HSCO drill bit, two 8.0 mm Titanium Coated HSCO bits, one 10.0 mm Titanium coated HSCO bit, one-year warranty and our guarantee that this will be one of your most used and beloved tools. DF-15DX Kit includes: (1) 1000 RPM Spitznagel Spot Weld Drill (1) DF-1480 8mm HSCO Bit (2) DF-1680T 8mm Titanium Coated HSCO Spot Weld Drill Bit (1) DF-1610T 10mm Titanium Coated HSCO Spot Weld Drill Bit (1) Bottle of Pneumatic Tool Oil (1) DF-15INOIL In-line Oiler (1) Deluxe Storage Case This tool can drill through UHSS or Boron Steel when used with the DF-1690 Tungsten Carbide Bits. We have lowered the RPM on all our Spot Weld Drills so that our new bits for Boron cut more efficiently. Ultra High Strength (UHSS) also known as Boron Steel is used by many vehicle manufacturers to lighten the vehicles weight and increase gas mileage while increasing structural strength. Boron steel is about 3 times stronger than regular High Strength Steel. Thus you can form it half as thick yet increase crash worthiness. Volvo is an early adopter and heavy user. Typical locations are in structurally significant locations. Intrusion beams, inner core of the B-Pillar, bumper and cabin reinforcements are all likely places that contain this Ultra High Strength Steel. 

Control the distance away from the edge and cut in a straight line!

The DF-PS36 Panel Saw is a powerful saw that quickly and cleanly cuts through sheet metal panels up to 16 gauge. A powerful . horse motor and proprietary hardened steel blade gives the user the ability to cut through virtually any external sheet metal. Light weight, compact design reduces user fatigue and gives the panel saw an added performance bonus: increased stability around tight areas. Double grip handle allows for excellent control and power in a comfortable ergonomic design. Side guide allows for a precise cut in a straight line exactly where you want it. Kit includes one steel blade.

APPLICATION

Perform controlled panel or roof cuts with an adjustable edge guide to make perfectly straight cuts at a desired distance from the edge or valley.

FEATURE & BENEFITS

• STRONG MOTOR - Powers the blade with more than enough torque needed to slice through most sheet metal.

• EDGE CONTROL- Set the distance away from the edge and cut parallel to it.

• DOUBLE GRIP HANDLE- Excellent control and power in a comfortable ergonomic design.

• HARDENED STEEL BLADE- Proprietary design enables the user to cut through a wide variety of steels.

Compact design of the DF-701 lets this tool work best in tight areas, like wheel wells. Remove thick sealer and undercoating with ease. Strips right down to bare metal with the three (3) DF-702 Course brushes.

The included decal eraser (DF-705) makes quick work of large stickers and decals. Eliminate labor intensive work with this economical tool.

If you don't have one you need one. The DF-700DX tool is so effective you will wonder what you ever did without it.

With the Course brush, undercoating and seam sealer are stripped away easily and cleanly, right down to the bare metal. The Brushes do not clog up. Remove rust and scale with the Medium brush and the fine brush is perfect for getting paint out of tight spaces. The geared Decal Eraser will strip a 2 foot by 2 foot decal in less than 2 minutes with no paint burn. The eraser is ideal for removing the adhesive backing on moldings and badges.

This inline version of the tool carries a year warranty and our guarantee of complete satisfaction.

The Deluxe Kit includes our new decal eraser for water based paint, the regular decal, 6 fiber discs, single and a double fiber disk holder, 1 course and 1 fine 23mm brush and the new 11mm course and fine brush with holder. Everything organized in a blow molded case.

Eliminator inline undercoat and decal remover TOOL & HUB ONLY. Consumable wheels and additional hubs sold separately.

The DF-601A protects electronic components such as ABS, engine management systems, fuel injection systems, radios, alarms and other sensitive electronics. Achieve greater protection by increasing voltage surge protection during mig and spot welding, jump starts, plasma cutting, and other repair applications.

Our unit out performs the rest and gives you greater protection features such as a heavy-duty varistor, not a small diode insuring maximum protection and peace-of-mind. Dent Fix manufactures this product proudly in the USA and we are so confident in the superiority of this product we offer a lifetime warranty.

A red LED indicates that the device is working and correctly connected. If the unit is overloaded or damaged, the light will go out.

Works on 12v and 24v systems. If more than one battery, you will need one Surge Protector on each battery. Do NOT use on Hybrid Vehicles.

Instructions:

Connect battery to terminals

Red to power

Black to ground

Red light will turn on